Rolls Royce Silver Cloud 2

- 07.41

Rolls-Royce Silver Cloud II
photo src: www.motor1.com

The Rolls-Royce Silver Cloud is an automobile produced by Rolls-Royce Limited from April 1955 to March 1966. It was the core model of the Rolls-Royce range during that period. The Silver Cloud replaced the Silver Dawn and was, in turn, replaced by the Silver Shadow. The J. P. Blatchley design was a major change from the pre-war models and the highly derivative Silver Dawn. As part of a range rationalisation the Bentley S1 is very similar, apart from its radiator grille.


Rolls-Royce Silver Cloud history, photos on Better Parts LTD
photo src: betterparts.org


Maps, Directions, and Place Reviews



Silver Cloud I

Construction was body-on-frame, which permitted special bodied versions, though the overwhelming majority were built with the standard Pressed Steel Company manufactured steel body shell. A light-weight aluminium-based alloy was used for doors, bonnet/hood and boot/trunk lid. The chassis was a simple steel box section, welded together and very rigid. The car was 5.38 m (212 in) long, 1.90 m (75 in) wide, and massed 1.95 tonnes. The engine was a 155 hp / 4000 rpm 4.9 L (300 cu in) six-cylinder unit with inlet over exhaust valves: twin SU carburettors were added in September 1957. The standard transmission was a four-speed automatic, the General Motors sourced Hydramatic transmission. The turning circle was 41 feet 8 inches (12.70 m).

Brakes were hydraulic and assisted by the Rolls-Royce mechanical servo with 11 in (279 mm) drums and suspension was independent coils at the front and semi-elliptic springs at the rear. Twin brake master cylinders were incorporated from April 1956.

Power steering and air conditioning became available as options in 1956.

A long-wheelbase version lengthened by 4 in (102 mm) was also made available in September 1957, outwardly very similar to the existing car but offering improved leg space for rear-seat passengers.

The British Motor magazine tested a standard-wheelbase factory-bodied Series I in 1956 recording a top speed of 102.9 mph (165.6 km/h) and acceleration from 0-60 mph (97 km/h) in 13.5 seconds and a fuel consumption of 14.5 miles per imperial gallon (19.5 L/100 km; 12.1 mpg-US). The test car cost £5078 including taxes.


Rolls Royce Silver Cloud 2 Video



Silver Cloud II

The Silver Cloud II was introduced in 1959. Little changed externally but it now had a 6.2 L V8 engine, which pushed the weight to 2.11 tonnes. Performance was greatly improved and top speed was raised to 183 km/h (114 mph), but the main improvements were in acceleration and torque. Power steering became standard. Electrically operated windows were now available as an option.

Although the improved performance of the new car was welcomed, commentators of the time noted that the V8-engined Silver Cloud II was neither as quiet nor as smooth as the straight-six-cylinder-engined Silver Cloud I, despite the new engine's hydraulic tappet operation. The new wet-linered V8 was also a little cramped in an engine bay intended originally for a narrower unit: in order to change the spark plugs it was necessary to remove the front wheel on the car's right side. There seems to have been a problem with crankshaft breakages in the earlier V8s: this was blamed on lack of lubrication to the bearings.

The basic architecture of the Silver Cloud II did not change between 1959 and 1963, but there were numerous minor changes implemented, notable among them a succession of improvements to the ventilation system. Interior changes in 1961 included the adoption of blue instrument lighting, the introduction of a combined indicator / headlamp flasher switch and of a handbrake warning light. A remodelled rear light assembly was introduced in May 1962 and a change to single sealed-beam headlamps was made in August 1962.

The Motor magazine tested a Series II in 1960. They recorded a top speed of 104.7 mph (168.5 km/h), acceleration from 0-60 mph (97 km/h) in 10.9 seconds and a fuel consumption of 13 miles per imperial gallon (22 L/100 km; 11 mpg-US). The test car cost £6092 including taxes.


COACHBUILD.com - H.J. Mulliner Rolls-Royce Silver Cloud II ...
photo src: coachbuild.com


Silver Cloud III

The Silver Cloud III was first displayed to the public at the Paris salon at the beginning of October 1962 but along with the Bentley S3 the cars were displayed on a specialist coachwork stand as if the modifications were to the special order of a particular customer. External dimensions were slightly altered, the interior remodelled, the weight reduced by a little over 100 kg (220 lb) and improvements made to the engine which included fitting 2-inch (51 mm) SU carburettors in place of the 1¾ inch units used on the Series II Silver Cloud. The compression ratio was increased to 9:1, reflecting the higher octane levels of premium fuel in major markets, although the option of a lower 8:1 compression ratio was still offered in markets where non-availability of higher octane fuels might be an issue. Rolls-Royce, as before, refused to disclose overall engine power output, but indicated that there had been an improvement of "perhaps 7%". Increased power and weight reduction boosted speed and performance slightly. The engine now included a nitride hardened crankshaft to reflect the extra power being generated and in response to reports of broken crankshafts in the earlier V8 Silver Clouds. The transmission was a GM Hydramatic which Rolls-Royce used under licence.

The headlights were grouped in a four-headlamp layout subsequently continued in the later Silver Shadow. Other external changes included a slightly increased slope of the bonnet to correspond with a 1 1/2 inches (3.8 cm) reduction in radiator grille height.

Between 1963 and 1966 there were no major changes. Stainless steel wheel trims replaced chrome-plated ones in April 1963, and an improved rear window demister was introduced in November of the same year. Wider front seats were fitted in January 1964, and five months later a revised headlamp surround now incorporated a very small RR monogram. A chrome badge reading "Silver Cloud III" in an italic font can be seen on the right bottom side of the boot of most UK and European delivered examples, whilst US versions were delivered without this badge.

As with earlier models, Rolls-Royce continued to make the Silver Cloud chassis available to traditional coachbuilders. A notable version is the so-called "Chinese Eye" design, notable for its slanted headlights, offered in Fixed Head and Drop Head Coupe style by Mulliner Park Ward. It was derived from the earlier H. J. Mulliner & Co. design for the Bentley S1 and S2 Continentals, made also available for the S3. Some 100 of the 328 coach-built Silver Cloud IIIs were of this style.


1962 Rolls-Royce Silver Cloud II
photo src: www.vantagemotorworks.com


Production

  • Silver Cloud: 2,238
  • Silver Cloud Long Wheelbase: 85
  • Silver Cloud special coachbuilder styles (convertibles, coupes etc.): 121
  • Silver Cloud II: 2,417
  • Silver Cloud II Long Wheelbase: 258
  • Silver Cloud II coachbuilder styles (convertibles, coupes etc.): 107
  • Silver Cloud III: 2,044
  • Silver Cloud III Long Wheelbase: 206
  • Silver Cloud III coachbuilder styles (convertibles, coupes etc.): 328

File:Rolls-Royce Silver Cloud III, Bj. 1964 (ret).jpg - Wikimedia ...
photo src: commons.wikimedia.org


Popular culture

A white 1965 Silver Cloud III featured prominently in The Avengers episode "Mission: Highly Improbable" broadcast November 1967. In a 1971 song called "Up To Me," the British rock band Jethro Tull refers to this car with the lyric "I'll buy a Silver Cloud to ride." Many famous singers in the 60s chose this car to be the ultimate ride in luxury. Just to name a few of them Elvis Presley, Elvis Presley Car, Frank Sinatra Frank Sinatra's Silver Cloud and John Lennon. Even the designer Massimo Vignelli owned a Silver Cloud, in his early New York years.

Footnote

Source of the article : Wikipedia



EmoticonEmoticon

 

Start typing and press Enter to search